吸盘/聚氨酯
VG.BR30X55 聚氨酯矩形波纹管吸盘
• 适用于处理流动包内的快餐食品和食品棒
• 带 1.5 波纹管的版本
• 能够处理较小水平差的物品
• 适用于抓持与表面平行或垂直的应用
• 唇口能够完全适应塑料薄膜
• 是拾取物品并将其放在旁边的理想选择
• 压花的胎面花纹可防止损坏处理的产品以及唇口内爆
技术特征
材料 聚氨酯 PU,50 肖氏硬度
颜色 蓝色
硬度 50 Shore
温度范围 +10 - +45 °C
配置和指标
•S1:实现选择输出信号的类型,PNP(P/2)或NPN(N)。
•S2:分别根据NPN或PNP选择(通过S1)实现选择内部PULLUP(PU)或PULL-DOWN(PD)电阻器。
•L1:通电时为绿色。
•L2:当常闭系列输出切换时为琥珀色(例如:全部触点打开)。
•L3:当切换常开系列时琥珀色(例如:全部触点闭合)。
•S1: enables the selection of the type of output signal, PNP(P/2) or NPN (N).
•S2: enables the selection of internal PULL-UP (PU) or PULLDOWN(PD) resistors depending on the NPN or PNP selection(via S1), respectively.
•L1: green when powered.
•L2: amber when the NC series output is switched (e.g. allcontacts open).
•L3: amber when the NO series is switched (e.g. all contactsclosed).
SBMS/SBMS-E - 从模块
每个单独的从模块均可以连接单个传感器。它由内部总线连接(由主模块提供)供电,并触发两个固态继电器的换向:基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出(PNP/2线或NPN)和逻辑(正向或反向)。该模块还有两个用于诊断的LED指示灯。
Each individual slave module enables the connection of a singlesensor.
It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.
Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.
以上信息由专业从事电动旋转装置的吉玛泰克于2024/5/4 12:38:48发布
转载请注明来源:http://shangrao.mf1288.com/jmtkzdh-2746949838.html